| CROSS-LAMINATED TIMBER HOUSE KIT INCLUDES THE FOLLOWING MATERIALS: | PACKAGE | ||
| Item | Wall package | Shell Package | Max Package |
| Design: | |||
| Preliminary Architectural Drawings (unstamped) | + | + | + |
| Shop Structural Drawings (unstamped) | + | + | + |
| Installation drawings | + | + | + |
| Material specification | + | + | + |
| CLT wall set | |||
| Wood sill plate – underlying board to install panels onto the foundation – 1 5/8″ х 4” (41mm x 100mm) | + | + | + |
| A set of CLT wall panels (solid timber slabs) for load-bearing external and internal walls according to static requirement, pre-cut according to the project documentation, finished quality from inside, industrial-grade on the outside. Species – white Spruce | + | + | + |
| Structural posts – GLT, 7,9″ х 7,9” (200mm x 200mm); if applicable | + | + | + |
| Roof elements | |||
| Timber batten vertical – 1 2/3” x 2” (44mm x 50mm) | + | + | + |
| Timber batten horizontal, – ¾” x 4 ¾” (20mm x 120mm) | + | + | + |
| Roof rafter system according to structural documentation; engineered | + | + | + |
| Inner ventilation battens – sawn board 1” x 2” (25mm x 50mm) | + | + | + |
| Elements of floors / CLT inter-floor panels set | |||
| Floor joists for the second floor, according to static requirement; if applicable | + | + | + |
| Frame elements | |||
| Elements of external frames (wall studs); if applicable | + | + | + |
| Elements of internal frames (wall studs); if applicable | + | + | + |
| Set of fasteners for the CLT panels: | |||
| Wedge anchor | + | + | + |
| Countersunk screws | + | + | + |
| Galvanized angle brackets | + | + | + |
| Post support; if applicable | + | + | + |
| Exterior finishing materials | |||
| Facade subsystem, horizontal battens, (41mm x 100mm) | – | + | + |
| Timber ventilation vertical battens, (44mm x 50mm) | – | + | + |
| Veneer for cladding of external walls | – | + | + |
| Eaves board – planed GLT board 0,8″ x 4,7″; if applicable | – | + | + |
| External sheath for filing eaves – planed GLT board 0,8″ x 4,7″; if applicable | – | + | + |
| Casing board for windows and doors – planed GLT board ¾” x 4″ (20 x 100mm) | – | + | + |
| Interior finishing materials | |||
| Veneer for cladding of internal framed walls – white Spruce, T&G ¾” x 7” (19 x 177mm); if applicable | – | – | + |
| Casing board for windows and doors – planed GLT board ¾” x 4″ (20 x 100mm) | – | – | + |
| Ceiling board – T&G, white Spruce ¾” x 4 ¾” (20 x 121 mm) engineered; if applicable | – | – | + |
| Ceiling molding 1″ x 1″ | – | – | + |
| Subfloor sleepers 1 2/3″ x 4″ (41x100mm) | – | – | + |
| T&G floorboard 1 1/2″ engineered board, Spruce | – | – | + |
| Plinth 1,2″ x 1,6″ | – | – | + |
| Options – Offered separately | |||
| A set of 4” (100mm) or more, solid timber slabs to cover 1st and/or 2nd floor, pre-cut according to the design documentation; finishing, or industrial quality | – | – | – |
| Drilling holes for concealed wiring | – | – | – |
| Horizontal log imitation grooves on interior panels | – | – | – |
| High-quality European style double or triple glazed VINYL or wood-clad tilt and turn windows, MULTIFUNCTIONAL GLASS with heat-saving and sun-protection properties. | – | – | – |
| Beams of the basement (floor joists) – planed engineered wood | – | – | – |
| Terrace board, white Spruce, 1 2/3″ x 4 ¾” (41 x 120mm) | – | – | – |
| Asphalt shingles | – | – | – |
| Roll waterproofing | – | – | – |
| OSB | – | – | – |
| Vapor barrier and vapor diffusion membrane | – | – | – |
| Stamp over the Shop Structural Drawings and engineering calculations | – | – | – |
*These options may be added to any package at additional cost.
Specific materials requirements may vary according to your desires, the home design, and your building location. Standard pricing may not include certain materials and extras shown in plans or photos but not listed above. Such items must be added.
Due to differences in personal preferences and requirements, the following items are not included in our packages: foundation, basement support post, windows, doors, any masonry items, plumbing and heating materials, electrical materials, kitchen cabinets or countertops, stains or finishes, roof insulation and roof covering, and miscellaneous items, such as flashing and vents. No labor to assemble included.